Putting the pieces of the puzzle back together…

So pretty large update I’m going to try to condense here from the past few days…

First of all went and did some shopping…

Then had a really good buddy of mine come by the shop and do the piping for me…

took them out to clean and wrap..

Modified the fuel rail to have two -6 AN fittings on either end, and gave it a fresh coat of paint…

Fitted the fuel lines…

Rail installed for a test fit..

Return

Feed

Regulator

ID1000’s installed…

Temporary fuel pressure gauge installed so I can set the base pressure (going to go electric, but don’t have the gauge yet)…

Modified the AC line so it will clear the IC

General overview of where I’m at.. piping installed, fueling done, wiring cleaned up.

0 comments