Sorry about the broken pics

I’ll be fixing them shortly… but for now sit tight!  (Update June 16: All pics should be working again now!) Here is a pic of Daniels EVO8 in the mean time, just finished cleaning up the dyno tune from late last year with some street…

Sounds good to me :)

A quick vid of my buddy pulling the car into the shop, gives a good idea of what the exhaust setup sounds like

Water pump woes

Welp…. tuning got put off… after the entire issue of the fan destroying everything around it and having a hell of a time trying to bleed the system, yesterday I pulled out the WP (brand new Bosch) on after the motor wanted to constantly over…

Good friends means the good times will continue…

Got a pic a few hours ago from the shop.. an awesome friend of mine stopped by and he and the shop owner decided to swap in the new parts for me… only thing left to do is connect my SPAL fan and finish bleeding…

Sometimes, $hit happens…

Well with all good things come some bad things… Yesterday a good buddy of mine helped me get my exhaust system finished.. really happy with the way it turned out and more happy how it sounds… sounds really really good and aggressive which is what…

It’s ALIVE!

Anywho moving forward has been a little slow… I’ve been very busy with other things recently, and had few things that set me back on my car so. First I finished off the SS hard line that will supply the boost reference to the boost…

Putting the pieces of the puzzle back together…

So pretty large update I’m going to try to condense here from the past few days… First of all went and did some shopping… Then had a really good buddy of mine come by the shop and do the piping for me… took them out…

Tranny is in, downpipe is on… end is in sight!

Tranny is in! Along with all new UUC mounts, SS clutch line for the slave, new Guibo, rebuilt shifter, etc… I bent the A/C line straighter so that it had enough length to attach to the compressors new location. Re-wrapped the ugly mild steel DP…

Intercooler mounted and fools pump is in!

Got the IC mounted yesterday… Some veldings… Fitted: Also did the fuel pump install… I had gotten a whole “thing” from Bob but didn’t like it at all… it was not something I could put in my tank and feel good about so I took…

Sometimes it’s the little details…

so pushing forward… spent some time cleaning up the tranny, rebuilding the shifter linkage with new parts to get rid of the slop from 228k km on the car.. new parts! shifter assembly taken apart and cleaned: old worn out parts: back together again with…